Pleiger Plei-Tech Single Durometer Squeegee Blade; 60A PT-22 SE-S 3/8 x 3/8 x 144 Inches

There are no reviews yet. | Write a review

Price: $37.01

    SIZE:  3/8” thick x 3/8” wide x 144” long

    SHORE A HARDNESS:  60 durometer          COLOR CODE:  Orange

    PT-22 (Plei-Tech® 22):  Recommend for use with Plastisol, water base and less aggressive UV and solvent based inks.  Color coded according to hardness.

    BEVEL:  SE-S  Square Edge – Single Durometer   Most common profile and used in a wide variety of substrates.  Generally, for more porous substrates, softer durometers should be used.  Smoother substrates require harder durometers.  Exceptionally wear and solvent resistant for long-life use.  Also available in precision edge for the highest print quality.  Suggested for use with Graphics, CD/DVD, Textile, Container/Bottle and PCB applications.

    ANGLE:  Not Applicable / Square Edge


    • Squeegees should be stored flat, in a dry (50% relative humidity) room with a temperature range from 65 ͦ -75 ͦ F.  Under these storage conditions, squeegee shelf life is approximately one year.
    • Production time should be monitored and rotation of squeegees should be done frequently.  Frequency would be dependent on the ink/solvent being used.  The use of aggressive UV and solvent based inks, will require the squeegee to be changed more often.  This will allow a more uniform print quality and increase the life of the squeegee.
    • After removal from the press, a squeegee should be wiped clean and stored in a dry area at room temperatures.
    • Allow a rest period of 24 hours, to recover from contact with chemicals, before the squeegee is put to use again or re-sharpened and put back in to production.
    • If you don’t see what you are looking for, or have additional questions, please feel free to contact us.