Pleiger Plei-Tech Single Durometer Squeegee Blade; 70A PT-22 DB-S 45V 3/8 x 2 x 140 Inches

CAT-25232-70
There are no reviews yet. | Write a review

Price: $176.29

    SIZE: 3/8” thick x 2” wide x 140” long

    SHORE A HARDNESS:  70 durometer            COLOR CODE:  Yellow

    PT-22 (Plei-Tech® 22): Recommend for use with Plastisol, water base and less aggressive UV and solvent based inks. Color coded according to hardness.

    BEVEL: DB-S Double Bevel – Single Durometer Better ink deposit control on cylindrical substrates and other irregular surfaces. Suggested for use with Container/Bottle applications.

    ANGLE: 45.0 ͦ Double Bevel Minimal dimensional stability because of thin printing tip. Best suited for printing with less aggressive inks and solvents, with lower squeegee pressure on irregular substrates.

    ADDITIONAL INFORMATION:

    • Squeegees should be stored flat, in a dry (50% relative humidity) room with a temperature range from 65 ͦ -75 ͦ F. Under these storage conditions, squeegee shelf life is approximately one year.
    • Production time should be monitored and rotation of squeegees should be done frequently. Frequency would be dependent on the ink/solvent being used. The use of aggressive UV and solvent based inks, will require the squeegee to be changed more often. This will allow a more uniform print quality and increase the life of the squeegee.
    • After removal from the press, a squeegee should be wiped clean and stored in a dry area at room temperatures.
    • Allow a rest period of 24 hours, to recover from contact with chemicals, before the squeegee is put to use again or re-sharpened and put back in to production.
    • If you don’t see what you are looking for, or have additional questions, please feel free to contact us.