thick x 2” wide x 144” long
HARDNESS: 70/90 durometer COLOR CODE: Yellow/Blue
PT-22 (Plei-Tech® 22): Recommend
for use with Plastisol, water base and less aggressive UV and solvent based
inks. Color coded according to hardness.
BEVEL: SE-D Square Edge – Dual Durometer The
90A durometer backing provides full support to the single soft printing edge of
the squeegee. It eliminates flex and
blade roll over, and helps maintain the blade angle for excellent ink
shear. Suggested for use with Graphics,
CD/DVD, Textile and PCB applications.
ANGLE: Not Applicable / Square Edge
- Squeegees should be stored flat, in a dry (50%
relative humidity) room with a temperature range from 65 ͦ -75 ͦ F. Under these storage conditions,
squeegee shelf life is approximately one year.
- Production time should be monitored and rotation of
squeegees should be done frequently. Frequency would be dependent on the ink/solvent being used. The use of aggressive UV and solvent based
inks, will require the squeegee to be changed more often. This will allow a more uniform print quality
and increase the life of the squeegee.
- After removal from the press, a squeegee should be
wiped clean and stored in a dry area at room temperatures.
- Allow a rest period of 24 hours, to recover from
contact with chemicals, before the squeegee is put to use again or re-sharpened
and put back in to production.
- If you do not see what you are looking for, or have
additional questions, please feel free to contact us.